How can I set up my Ingenico ICT 220's network settings?

1. Press the red Clear button to make sure you're on the main home screen

2. Press the punctuation key (.;#*)

3. Type in the admin password and press the green Enter button. The default password is 1234567F.

4. Press 3 for Setup Menu

5. Press 2 for Communication

6. Press 3 for Ethernet

7. Press 2 for TerminalSetup

8. Press 2 for Static IP

9. Edit the static IP settings

To enter the machine's IP address, press 1 for TerminalIP, use the keypad to type the IP address, then press the green Enter button
To enter the machine's gateway IP address, press 2 for Gateway IP, use the keypad to type the IP address, then press the green Enter button
To enter the machine's subnet mask, press 3 for IPSubmask, use the keypad to enter the subnet mask, then press the green Enter button
To enter the machine's primary DNS IP address, press 4 for PriDNSIP, use the keypad to enter the IP address, then press the green Enter button
To enter the machine's secondary DNS IP address, press 5 for SecDNSIP, use the keypad to enter the IP address, then press the green Enter button

10. Press the red Clear button to reboot the terminal and apply your settings

If you are a 360 Payments customer and need help, please call us at 408-295-8360.