1. Make sure the terminal is on the "Idle" prompt
2. Press the menu button and enter your password (if you don't know your password, call us at 408-295-8360)
3. Press the down arrow key and select Communication
4. Press the down arrow key and select ECR Comm. type
5. Select Ethernet
6. Verify the communication port, then press Enter
7. Select the protocol type
8. The device will return to the communication menu
9. Press the Cancel button to return to the main screen
If you need help, call us at 408-295-8360.
Comments
0 comments
Please sign in to leave a comment.